Of 500 mA, and an exposure time of 310 ms per projection. A set of 360 ?projections was used for a full 360 scan. Images were reconstructed using the COBRA real-time reconstruction with the Fexinidazole biological activity Sheep-Logan filter. The voxel size was 0.09560.09560.095 mm3.Experimental ProtocolThe animals were fasted overnight prior to the scan [12]. Before injection, 30 minutes after injection and during the scans, the animals were anaesthetized using a mixture of 3 sevoflurane (Abbott Scandinavia AB, Sweden) mixed with 35 O2 in N2 by Table 1. Basic characteristics of investigated animals.No. of animals1 8 (11/11) 12 (12/12) 11 (12/12) 11 (11/11) 12 (12/12) 12 (12/12) 11 (12/12) 11 12926553 (11/12) 11 (11/11)Group 0 weeks 8 weeks 16 weeks 24 weeks 32 weeks 8 weeks+diet 16 weeks+diet 24 weeks+diet 32 weeks+dietAge 8 16 24 32 40 16 24 32Weeks on high-fat diet ?????8 16 24Weight6SD (g) 22.962.0 31.661.2*** 33.760.9*** 35.662.2 35.762.*** ***Cholesterol6SD (nM) 13.464.1 13.961.9 21.064.9* 18.662.4* 15.762.3 21.965.0**, 31.065.### ***, ## ###34.062.1*** 42.765.***, ## ###47.864.5***, 47.665.32.465.3***, 33.464.***, ###***, ###1 Number of animal imaged and weighed (number of animal tested for cholesterol/number of animals tested for gene expression). *p,0.05. **p,0.01. ***p,0.001 vs. 0 weeks ## p,0.01. ### p,0.001 vs. diet (all p-values were Bonferroni corrected). doi:10.1371/journal.pone.0050908.tFDG and Gene Expression in Murine AtherosclerosisPET ProtocolPET data were acquired with a microPET Focus 120 scanner (Siemens Medical Solutions). The energy window of the emission scan was set to 350?50 keV with a time resolution of 6 ns. The acquired emission dataset was automatically stored in listmode. All listmode data were post-processed into 1286144695 sinograms using a span of three and a ring difference of 47. The sinograms were then reconstructed using 3D Maximum a posteriori (MAP) algorithms [13]. The voxel size was 0.360.360.3 mm3 and in the centre of field of view, the resolution was 1.2 mm full-width at half-maximum. The 
emission data were normalized and decay and dead time corrected. The system was calibrated to provide the quantification unity in becqerel per millilitre. 18 F-FDG uptake in the aorta was quantified for each animal using the image analysis software Inveon Research Workplace (Siemens Medical 
Solutions). Image fusion was achieved by doing rigid registration (feature of the Inveon Research Workplace software) and subsequently confirmed visually on basis of three distinct fiducial markers placed directly on the animal bed within the field of view but 5 mm from the regions of interest (ROIs). In Figure 1, a CT, a fused PET/CT, and a PET image of a mouse is shown. The 3D ROIs were drawn on the axial slices from the CT scan intending to cover the aorta, from the heart to the kidney MedChemExpress Dimethylenastron arteries. The aorta appears white at the CT image (Figure 2a) due to the contrast agent. In order to include the vessel wall, the ROIs were on average drawn with a radial increase of 0.13 mm (Figure 2b). About 70 slices (every fifth slice) per mouse were drawn to cover the aorta followed by ROI interpolation (Figure 2C). During subsequent analysis, standardized uptake values (SUVs) were calculated. The mean value of the radioactivity in the ROIs was used i.e. SUVmean.time PCR (qPCR) in tissue representing non-atherosclerotic and atherosclerotic mice. To analyze gene expression stability, the software geNorm [15] was used. Actin beta (ACTB), beta-2 microglobulin (B2M) and glu.Of 500 mA, and an exposure time of 310 ms per projection. A set of 360 ?projections was used for a full 360 scan. Images were reconstructed using the COBRA real-time reconstruction with the Sheep-Logan filter. The voxel size was 0.09560.09560.095 mm3.Experimental ProtocolThe animals were fasted overnight prior to the scan [12]. Before injection, 30 minutes after injection and during the scans, the animals were anaesthetized using a mixture of 3 sevoflurane (Abbott Scandinavia AB, Sweden) mixed with 35 O2 in N2 by Table 1. Basic characteristics of investigated animals.No. of animals1 8 (11/11) 12 (12/12) 11 (12/12) 11 (11/11) 12 (12/12) 12 (12/12) 11 (12/12) 11 12926553 (11/12) 11 (11/11)Group 0 weeks 8 weeks 16 weeks 24 weeks 32 weeks 8 weeks+diet 16 weeks+diet 24 weeks+diet 32 weeks+dietAge 8 16 24 32 40 16 24 32Weeks on high-fat diet ?????8 16 24Weight6SD (g) 22.962.0 31.661.2*** 33.760.9*** 35.662.2 35.762.*** ***Cholesterol6SD (nM) 13.464.1 13.961.9 21.064.9* 18.662.4* 15.762.3 21.965.0**, 31.065.### ***, ## ###34.062.1*** 42.765.***, ## ###47.864.5***, 47.665.32.465.3***, 33.464.***, ###***, ###1 Number of animal imaged and weighed (number of animal tested for cholesterol/number of animals tested for gene expression). *p,0.05. **p,0.01. ***p,0.001 vs. 0 weeks ## p,0.01. ### p,0.001 vs. diet (all p-values were Bonferroni corrected). doi:10.1371/journal.pone.0050908.tFDG and Gene Expression in Murine AtherosclerosisPET ProtocolPET data were acquired with a microPET Focus 120 scanner (Siemens Medical Solutions). The energy window of the emission scan was set to 350?50 keV with a time resolution of 6 ns. The acquired emission dataset was automatically stored in listmode. All listmode data were post-processed into 1286144695 sinograms using a span of three and a ring difference of 47. The sinograms were then reconstructed using 3D Maximum a posteriori (MAP) algorithms [13]. The voxel size was 0.360.360.3 mm3 and in the centre of field of view, the resolution was 1.2 mm full-width at half-maximum. The emission data were normalized and decay and dead time corrected. The system was calibrated to provide the quantification unity in becqerel per millilitre. 18 F-FDG uptake in the aorta was quantified for each animal using the image analysis software Inveon Research Workplace (Siemens Medical Solutions). Image fusion was achieved by doing rigid registration (feature of the Inveon Research Workplace software) and subsequently confirmed visually on basis of three distinct fiducial markers placed directly on the animal bed within the field of view but 5 mm from the regions of interest (ROIs). In Figure 1, a CT, a fused PET/CT, and a PET image of a mouse is shown. The 3D ROIs were drawn on the axial slices from the CT scan intending to cover the aorta, from the heart to the kidney arteries. The aorta appears white at the CT image (Figure 2a) due to the contrast agent. In order to include the vessel wall, the ROIs were on average drawn with a radial increase of 0.13 mm (Figure 2b). About 70 slices (every fifth slice) per mouse were drawn to cover the aorta followed by ROI interpolation (Figure 2C). During subsequent analysis, standardized uptake values (SUVs) were calculated. The mean value of the radioactivity in the ROIs was used i.e. SUVmean.time PCR (qPCR) in tissue representing non-atherosclerotic and atherosclerotic mice. To analyze gene expression stability, the software geNorm [15] was used. Actin beta (ACTB), beta-2 microglobulin (B2M) and glu.